NEWS from CPSC
U.S. Consumer Product Safety Commission
Office of Information and Public Affairs Washington, DC 20207
FOR IMMEDIATE RELEASE
January 30, 2009
CPSC Recall Hotline: (800) 638-2772
CPSC Media Contact: (301) 504-7908
CPSC Grants One Year Stay of Testing and Certification Requirements for Certain Products
WASHINGTON, D.C. - The U.S. Consumer Product Safety Commission voted unanimously (2-0) to issue a one year stay of enforcement for certain testing and certification requirements for manufacturers and importers of regulated products, including products intended for children 12 years old and younger. These requirements are part of the Consumer Product Safety Improvement Act (CPSIA), which added certification and testing requirements for all products subject to CPSC standards or bans.
Significant to makers of children’s products, the vote by the Commission provides limited relief from the testing and certification requirements which go into effect on February 10, 2009 for new total lead content limits (600 ppm), phthalates limits for certain products (1000 ppm), and mandatory toy standards, among other things. Manufacturers and importers – large and small – of children’s products will not need to test or certify to these new requirements, but will need to meet the lead and phthalates limits, mandatory toy standards and other requirements.
The decision by the Commission gives the staff more time to finalize four proposed rules which could relieve certain materials and products from lead testing and to issue more guidance on when testing is required and how it is to be conducted.
The stay will remain in effect until February 10, 2010, at which time a Commission vote will be taken to terminate the stay.
The stay does not apply to:
Four requirements for third-party testing and certification of certain children’s products subject to:
The ban on lead in paint and other surface coatings effective for products made after December 21, 2008;
The standards for full-size and non full-size cribs and pacifiers effective for products made after January 20, 2009;
The ban on small parts effective for products made after February 15, 2009; and
The limits on lead content of metal components of children’s jewelry effective for products made after March 23, 2009.
Certification requirements applicable to ATV’s manufactured after April 13, 2009.
Pre-CPSIA testing and certification requirements, including for: automatic residential garage door openers, bike helmets, candles with metal core wicks, lawnmowers, lighters, mattresses, and swimming pool slides; and
Pool drain cover requirements of the Virginia Graeme Baker Pool & Spa Safety Act.
The stay of enforcement provides some temporary, limited relief to the crafters, children’s garment manufacturers and toy makers who had been subject to the testing and certification required under the CPSIA. These businesses will not need to issue certificates based on testing of their products until additional decisions are issued by the Commission. However, all businesses, including, but not limited to, handmade toy and apparel makers, crafters and home-based small businesses, must still be sure that their products conform to all safety standards and similar requirements, including the lead and phthalates provisions of the CPSIA.
Handmade garment makers are cautioned to know whether the zippers, buttons and other fasteners they are using contain lead. Likewise, handmade toy manufacturers need to know whether their products, if using plastic or soft flexible vinyl, contain phthalates.
The stay of enforcement on testing and certification does not address thrift and second hand stores and small retailers because they are not required to test and certify products under the CPSIA. The products they sell, including those in inventory on February 10, 2009, must not contain more than 600 ppm lead in any accessible part. The Commission is aware that it is difficult to know whether a product meets the lead standard without testing and has issued guidance for these companies that can be found on our web site.
The Commission trusts that State Attorneys General will respect the Commission's judgment that it is necessary to stay certain testing and certification requirements and will focus their own enforcement efforts on other provisions of the law, e.g. the sale of recalled products.
Please visit the CPSC Web site at www.cpsc.gov/about/cpsia/cpsia.html for more information on all of the efforts being made to successfully implement the CPSIA.
Statements on this vote by Acting Chairman Nancy Nord and Commissioner Thomas H. Moore are in portable document format (PDF).
Send the link for this page to a friend! The U.S. Consumer Product Safety Commission is charged with protecting the public from unreasonable risks of serious injury or death from thousands of types of consumer products under the agency's jurisdiction. The CPSC is committed to protecting consumers and families from products that pose a fire, electrical, chemical, or mechanical hazard. The CPSC's work to ensure the safety of consumer products - such as toys, cribs, power tools, cigarette lighters, and household chemicals - contributed significantly to the decline in the rate of deaths and injuries associated with consumer products over the past 30 years.
To report a dangerous product or a product-related injury, call CPSC's hotline at (800) 638-2772 or CPSC's teletypewriter at (800) 638-8270, or visit CPSC's web site at www.cpsc.gov/talk.html. To join a CPSC email subscription list, please go to https://www.cpsc.gov/cpsclist.aspx. Consumers can obtain this release and recall information at CPSC's Web site at www.cpsc.gov.
Saturday, January 31, 2009
Thursday, January 29, 2009
Here is a bit of exciting news regarding the issue around the CPSIA issue ...
Breaking news Via Bloomberg: Panel Exempts Some Products from US Lead Rules including wood, wool, cotton, silk, and gemstones - proof that your input (and a bunch of jewelry lobbyists) can indeed make a difference. Read about from CMP Co-Editor Kristen Chase at Eco Child's Play